Back up sump pump water powered units use the water pressure in your home to empty the pit when the main pump stops. They need no power and no battery. They do need city water, so a home on a well cannot use one. If your main pump has quit, get help with your pump.
How It Moves The Water
The pump has a small part called a jet. City water rushes through the jet, and that fast water makes suction. The suction pulls water up from the pit. Both waters then leave the house through the pipe that runs outside.
The jet itself has no moving parts. One maker says the pump has 3 connections: the water feed, the suction pipe and the pipe that leads out.
What Turns It On
A float sits in the pit, above the float on the main pump. A thin tube links the float to a valve on the pump.
Rising water lifts the float and opens the valve, so city water starts to flow through the jet. The valve shuts again once the pit is low, and the pump stops. For more on how floats work, read about a float that sticks.
What It Needs
- It needs a link to the city water line in your home, which one maker says should be 3/4 of an inch or 1 inch wide.
- It needs a suction pipe that goes down into the pit.
- It needs a pipe that carries the water out of the house.
That maker also asks for a backflow preventer on the water line, plus a screen and a check valve on the suction pipe. The backup can sit in the same pit as the main pump, so you do not need a second pit.
Water Pressure Matters
The pump runs only on the push of your city water. One maker says to have at least 40 PSI of water pressure in the home. It can run with less, but it will pump more slowly, so check your water pressure before you buy one.
Why It Does Not Work On A Well
A well pump needs power to make water pressure. When the power goes out, the well pump stops, and the backup has nothing to push it.
If your home is on a well, look at a battery pump instead.
Test It
Lift the float by hand, or pour a bucket of water into the pit, and make sure the backup starts on its own. One maker says to test it twice a year.
Will It Run In A Power Outage?
Yes, as long as there is water pressure in your home, it will keep running.
Can It Go In The Same Pit As My Main Pump?
Yes. The backup sits in the same pit, and its float is set higher than the float on the main pump.
Who Should Put One In?
The pump ties into the water line you drink from, so a backflow preventer has to go on that line. Have a plumber do the work and check the rest of your pump setup while they are there.