East City Plumbing

How To Increase Water Pressure In House Pipes: Causes And Fixes

East City Plumbing

How to increase water pressure in house pipes starts with one check: is the flow weak at one tap, or at every tap? A weak tap often has a small cause you can fix in a few minutes. If every tap is weak, you may need a plumber's help.

One Tap Or Every Tap

Weak flow at one tap, or in one part of the house, points to a problem in your own pipes.

When the whole house is weak, look further. The main valve could be partly closed. A pipe could be frozen, or a crew could be working on the street.

Clean The Tap Screens

Each tap has a small screen at the end, called an aerator. Dirt can clog it, most of all after work on the pipes.

Unscrew the screen, rinse it, and put it back on. Then run the tap and see if the flow is better.

Open The Main Valve All The Way

The main water valve must be open for water to reach your taps. In most homes, it sits on the foundation wall where the water pipe comes in, right before the water meter.

If someone closed it for a repair, check that it is now open all the way. A City crew checks the same thing first when it tests pressure.

Rule Out A Frozen Pipe

In winter, a frozen pipe can cut the flow at one tap or at all of them. Taps with low pressure on a cold day are likely fed by a frozen pipe. Read the signs of a frozen pipe before you try anything else.

Check The Street

Work on the street can lower the pressure in your home. So can a water main break. Ask a neighbour if their water is weak too. If more than one home is low, a crew may already be at work.

Peterborough has 20 to 30 water main breaks each year, and they happen most often in winter. To report one, call the City at 705-748-9301, extension 1295.

Older Pipes

The number of taps and people using water at once can affect your pressure. So can the state of the pipes in your home. If your house is old and you are not sure what the pipes are made of, a plumber can tell you.

When To Call A Plumber

Call a plumber if one tap is still weak after you clean its screen. Call as well if every tap is weak, the main valve is open, and the street is fine.

The City of Peterborough owns the water pipe up to your property line. The pipes inside your home are yours to fix. If a pipe is leaking, read about stopping a leak first.

Why Is The Pressure Low At Only One Tap?

The problem is most likely in your own pipes. Start by cleaning the screen on the end of that tap.

Can A Frozen Pipe Lower The Pressure?

Yes, it can. A tap with weak flow on a cold day is likely fed by a frozen pipe. Check the pipes along outside walls first.

Who Fixes Low Pressure From The Street?

The City owns the pipe from the main to your property line. If you think there is a main break, call the City of Peterborough at 705-748-9301, extension 1295.

Does Running Several Taps At Once Matter?

It can. The number of taps and people using water at the same time can affect the pressure in your home.

Request A Visit

Tell us what you see and when it started, and say if water is still running, so we know how soon you need help.

Read how we handle your details in our privacy policy.

Online requests are not open yet.