East City Plumbing

Water Heater Anode Rod Removal

East City Plumbing

Water heater anode rod removal often comes up when the hot water starts to smell like rotten eggs. Taking the rod out for good is a poor fix, and one maker says it voids the tank warranty. Here is what the rod does and when to change it. If you live near Peterborough, you can also learn how to drain an electric tank safely.

What The Rod Does

The rod is a bar of metal that hangs inside the tank. It is used up as the heater works, so it has to be checked and replaced when it is close to worn out. A rod that is used up too fast can shorten the life of the water heater.

Rods come in magnesium and aluminum.

Why Hot Water Can Smell

The most common cause of the smell is bacteria that is already in the water. It grows fast in warm water, like the water in a tank, and it makes the rotten egg smell. The rod can add to the gas that causes the smell.

You have two fixes to ask about. One is to treat the tank with chlorine. The other is to change the rod from magnesium to aluminum. The maker's guide we read does not suggest taking the rod out for good, since that voids the warranty.

Softened Water Wears The Rod Faster

A water softener makes the rod wear out faster, and the maker's guide we read says that can shorten the life of the whole water heater. If your home has a softener, have the rod checked more often, and replace it when it is close to worn out.

How To Drain An Electric Tank

Before anyone changes the rod, the tank is often drained. One maker suggests that you drain and flush the tank every 6 months to clear out sediment. These steps are for an electric tank only. In Ontario, gas work is for a certified gas technician, so call one if your tank burns gas.

The water in the tank can be hot enough to burn you, so take care.

  1. Turn off the power to the heater, and keep it off until the job is done.
  2. Turn off the cold water that feeds the tank.
  3. If no floor drain is close, run a garden hose from the drain valve to a floor drain.
  4. Open a hot water tap nearby to let air in, so the tank drains faster.
  5. Let the water run until it comes out clear, and then close the drain valve.
  6. Turn the water supply back on, and fill the tank all the way.
  7. Close the tap, check for leaks, and then turn the power back on.

Use a hose rated for at least 94°C (200°F). If yours is not rated that high, run a hot tap until the water in the tank is no longer hot. Never turn the power on while the tank is empty, because the heating parts will burn out when they run dry.

Water may bead up on the outside of the tank as it refills. That is condensation, and it is not a leak.

When To Call A Plumber

Ask a plumber to take the old rod out and put the new one in. If the tank itself is leaking, it cannot be repaired, and the heater needs to be replaced. Read about swapping out a tank if you are thinking about a new heater, or compare fuel choice first.

Should I Take The Rod Out To Stop The Smell?

No, you should not. The maker's guide we read says that voids the warranty. Ask about treating the tank with chlorine, or about an aluminum rod.

How Often Should The Rod Be Checked?

If you have a water softener, have it checked more often, because softened water wears the rod faster.

Can A Leaking Tank Be Fixed?

No, it cannot. If the fittings are tight and the tank still leaks, the heater needs to be replaced.

Request A Visit

Tell us what you see and when it started, and say if water is still running, so we know how soon you need help.

Read how we handle your details in our privacy policy.

Online requests are not open yet.