To replace a water heater with a tankless unit, you need three things: the right size, the right wiring and a safe way out for the old tank. This guide covers an electric swap. If your old tank burns gas, the gas side belongs to a certified gas technician. Here is how to plan the job for a home in Peterborough.
Step 1: Size The New Unit
A unit with no tank can only heat so much water at once. Ask a plumber to size it for your home, since every family uses hot water in a different way. If your family often runs several showers at the same time, say so.
Before you commit, read the pros and cons. If you want hot water at just one tap, read about a heater at one tap instead.
Step 2: Plan The Wiring
An electric unit with no tank may need new wiring. In Ontario, the Electrical Safety Authority says the only way to be sure electrical work is safe and legal is to hire a Licensed Electrical Contractor.
That contractor files the notice of work, so the job has a permit. When the work is done, ask for the Certificate of Acceptance and keep it for your insurance records.
Step 3: Check Your Rental Contract
If you rent your tank, call your current supplier before you sign anything new. You will have to end the old contract, and there may be fees to end it and take the tank away. Your supplier may also offer you an upgrade.
Watch out for sellers at the door. In Ontario, a business cannot sell or rent you a water heater at your home unless you asked it to come.
Step 4: Drain The Old Electric Tank
The water in the old tank can be hot enough to burn you, so take care. These steps are for an electric tank only.
- Turn off the power to the heater, and keep it off.
- Turn off the cold water that feeds the tank.
- Run a garden hose from the drain valve to a floor drain.
- Open a hot water tap nearby to let air in.
- Let the tank drain all the way.
Use a hose rated for at least 94°C (200°F). If yours is not rated that high, run a hot tap until the water in the tank is no longer hot.
Step 5: Have A Licensed Pro Install It
Have a licensed pro put in the new unit. After that, plan on service every year or two, and check the owner's manual for what to look at.
If your old tank is leaking right now, it cannot be repaired. Turn off the water to the tank and get urgent help.
Can I Do The Electrical Work Myself?
Hire a Licensed Electrical Contractor. In Ontario, that is the only way to be sure the work is safe and legal.
What If My Old Tank Is Rented?
Call your current supplier first. You will have to end the contract, and there may be fees to end it and remove the tank.
What If My Old Tank Burns Gas?
Call a certified gas technician for the gas side of the job. Gas work in Ontario needs a certificate.